Gas Lift

Compressor downtime remains one of the primary causes of lost production, unstable injection performance, and fugitive methane emissions in gas lift operations. This paper reviews a zero-methane emission compression optimization system designed to stabilize gas lift performance by mitigating gas lift compressor issues, reducing shutdown frequency, and capturing methane emissions. The closed-loop...

Gas Lift (GL) has emerged as a preferred Artificial Lift (AL) technology in the Permian Basin. As GL wells age, operators are looking at late-life AL alternatives, such as Plunger Assisted Gas Lift (PAGL) and Gas Assisted Plunger Lift (GAPL) to reduce gas injection and improve overall lift efficiency. However, conversion to these plunger-based late-life AL systems has been slow and somewhat costly...

Gas lift is the primary artificial lift system utilized across approximately 2,000 wells in Oxy’s Delaware Basin assets. As the number of wells increase and personnel resources remain constrained, production engineers frequently focus on resolving urgent operational issues, such as well or equipment failures. This situation results in limited time for consistent and proactive surveillance and...

Using gas to displace fluid and reduce hydrostatic pressure has been a producing practice since the late 19th century. As time has passed and technology has accelerated, we now are able to build a communication stream between gas lift optimization and the data acquired during production operations. 

In our fast-paced industry, data is often looked upon to help us make decisions and solve...

Gas lift remains a cornerstone of artificial lift technology, particularly for addressing challenges in high Gas-Liquid Ratio (GLR) wells and heavily deviated wellbore geometries. However, declining reservoir pressures, high water cuts, and limited gas compression capacity present significant operational challenges. Coupled with increasing emphasis on cost efficiency and sustainability, these...

High Pressure Gas Lift (HPGL) has established itself as a viable and valuable high-rate artificial lift method well suited to the challenges in modern unconventional production environments. Operators across all unconventional basins in North American unconventional basins are increasingly turning to HPGL to help them produce wells, especially during the initial production (IP) phase of the well’s...

The Eagle Ford, Bakken and other operating areas often prove to be challenging areas for the successful, long-term operation of gas lift valves due to numerous factors which may compromise the efficiency of the installation and reduce production and life expectancy of the valve. These factors may include well bore heat, well bore fluids and gases, well bore contaminants and debris, offset...

Electric Gas Lift (eGL) is a relatively new artificial lift method. While fundamentally similar to traditional gas lift, using gas to aid in the production of wellbore fluids, the operating principle of the valves are different. Traditional gas lift systems use nitrogen charged bellows to open and close the valves at certain wellbore conditions, whereas electric gas lift valves (eGLVs) function by...

During intermittent gas lift, a low-density fluid (gas) is used to lift a high-density fluid (oil) from the bottom of the well to the surface. As a result of the oil having a higher density than the gas, some amount of the oil falls back in the form of droplets or in a film along the wall of the tubing to join the next slug of oil. However, there is still no method to accurately estimate the...

In many industries, technology improvements in high end devices eventually improves performance in lower cost like devices. The same is true in that gas lift equipment development for deepwater gas lift applications can help improve gas lift equipment designs used in land based gas lift wells. Today’s standards and client specifications for deepwater gas lift equipment requires extraordinary...