Artificial Lift

The oil and gas industry has used Variable Frequency Drives (VFDs) for decades to match production to inflow. In sucker rod pump applications, it is well understood that optimizing pumping speed dramatically improves pump efficiency and failure rate. However, the same technology provides the opportunity to make multiple speed changes in a pumping cycle. The effects of speed changes within a...

This study evaluates a 3-1/2 in. tubing well converted from continuous gas lift to plunger-assisted gas lift (PAGL) using a bypass plunger that initially failed to complete cycles under flowing conditions. The objective is to diagnose the root cause, determine operational boundaries for PAGL in 3-1/2 in. tubing, and assess the feasibility of PAGL relative to tubing replacement and higher gas...

Operators of marginal plunger lift wells face significant challenges in optimizing performance while managing tight economic constraints. These wells, characterized by lower flow rates, are often highly sensitive to operational costs, making it difficult to justify investments in advanced digital automation and control systems. Yet, these wells represent a substantial portion of production assets...

Large-scale plunger lift operations demand surveillance methods that can balance proactive optimization with targeted field intervention. To replace route-based monitoring, Occidental Petroleum developed an integrated closed loop control program as well as SCADA based exceptions for its 2,000+ plunger lift wells. Plunger Lift Artificial Intelligence (PLAI) delivers proactive plunger lift...

The plunger lift process can be divided into four distinct cycles: buildup, upstroke, after flow, and liquid discharge. One key parameter that can be measured for optimizing oil production is the total gas flow rate produced during the liquid discharge cycle. Typically, the only known parameters are the controller’s on and off time, so post-processing is required to identify the liquid discharge...

Jet lift systems have earned a strong reputation as an effective artificial lift method for unconventional oil well production across the most prolific hydrocarbon-producing regions in the United States of America. In prolific reservoirs such as the Permian Basin, Eagle Ford, and Bakken, operators have successfully utilized jet lift as the primary lifting method for challenging oil wells...

Frac hits in unconventional developments often cause persistent liquid loading, increased flowing pressures, and reduced lift efficiency in offset gas-lift wells. These effects are largely driven by trapped frac fluids, elevated water saturation, and unstable multiphase flow, all of which delay production recovery. This paper evaluates the use of targeted surfactant treatments to accelerate post...

Oil and gas operators increasingly face difficulties optimizing production from wells characterized by variable flow regimes and dynamic pressure conditions. Conventional gas lift systems are often unable to respond effectively to these fluctuations, resulting in inefficiencies, elevated downtime, and reduced hydrocarbon recovery. These challenges are compounded by the need to control costs...

Intermittent gas lift (IGL) is emerging as a key late-life artificial lift method for the growing number of aging horizontal wells in the Permian Basin. With more than 20,000 wells on continuous gas lift, operators face challenges in converting to IGL and operating it effectively. This study synthesizes lessons gathered from controlled IGL experiments at the Texas Tech Oilfield Technology Center...

This paper explores the High Pressure Gas Lift Upper Completion Design Strategy in the Delaware Basin, focusing on optimizing gas lift design for a life-of-well approach that ensures optimal economics. Various design options are assessed to balance cost savings, reliability, and operational efficiency. A comparative analysis of different gas lift designs, including Single Point (no GLV), Side...