Gas Lift

Gas lift remains a cornerstone of artificial lift technology, particularly for addressing challenges in high Gas-Liquid Ratio (GLR) wells and heavily deviated wellbore geometries. However, declining reservoir pressures, high water cuts, and limited gas compression capacity present significant operational challenges. Coupled with increasing emphasis on cost efficiency and sustainability, these...

High Pressure Gas Lift (HPGL) has established itself as a viable and valuable high-rate artificial lift method well suited to the challenges in modern unconventional production environments. Operators across all unconventional basins in North American unconventional basins are increasingly turning to HPGL to help them produce wells, especially during the initial production (IP) phase of the well’s...

The Eagle Ford, Bakken and other operating areas often prove to be challenging areas for the successful, long-term operation of gas lift valves due to numerous factors which may compromise the efficiency of the installation and reduce production and life expectancy of the valve. These factors may include well bore heat, well bore fluids and gases, well bore contaminants and debris, offset...

Electric Gas Lift (eGL) is a relatively new artificial lift method. While fundamentally similar to traditional gas lift, using gas to aid in the production of wellbore fluids, the operating principle of the valves are different. Traditional gas lift systems use nitrogen charged bellows to open and close the valves at certain wellbore conditions, whereas electric gas lift valves (eGLVs) function by...

During intermittent gas lift, a low-density fluid (gas) is used to lift a high-density fluid (oil) from the bottom of the well to the surface. As a result of the oil having a higher density than the gas, some amount of the oil falls back in the form of droplets or in a film along the wall of the tubing to join the next slug of oil. However, there is still no method to accurately estimate the...

In many industries, technology improvements in high end devices eventually improves performance in lower cost like devices. The same is true in that gas lift equipment development for deepwater gas lift applications can help improve gas lift equipment designs used in land based gas lift wells. Today’s standards and client specifications for deepwater gas lift equipment requires extraordinary...

Traditional simulation-based approach for Gas-Lift Optimization depends heavily on the quality of reservoir and fluid data. Excessive OPEX and man-hours are needed to maintain data integrity and to ensure the models are suitably calibrated. Even then, pseudo-steady-state models do not consider losses due to multi-pointing condition and slugging behavior; and for dynamic multiphase flow simulation...

Surface controlled gas lift has several obvious and predictable benefits, such as increased production due to deeper injection and continuous optimization. Installations over recent years have not only proven the validity of these benefits, but they have also offered some surprising and unanticipated advantages. 

Rather than focusing on the anticipated benefits of surface controlled gas lift...

This paper presents a novel design of a gas lift check valve featuring an integrated pressure isolation mechanism, aimed at optimizing gas lift operations in oil wells. Operators utilizing High Pressure Gas Lift, or Single Point Gas Lift systems are often converting to conventional gas lift or other Artificial Lift methods once the production has declined. However, this conversion requires a...

Gas lift is long known to be an effective and versatile form of artificial lift and is widely used in oil and gas production. Compressors are a vital part of the gas lift process and are present in large numbers in the oil and gas industry. The design of these compressors has for many years allowed for the release of hydrocarbons into the environment. Concerns over the environmental impact of...