Shawn Dawsey, Downhole Diagnostic
Data from fluid level shots can be very valuable in optimizing the chemical treatment program. For example, selecting continuous treatment vs truck treatment, adjusting flush volumes on truck treated wells, ensuring slip-streams are open and adequately slipping, or raising the SN depth on wells that cannot be pumped down. Just because chemical is being introduced into the backside does not mean it...
Jared Bruns and Abhishek Sharma, Schlumberger Will Whitley, Oasis Petroleum
Modern sucker rod pump operations rely on pump-off controller’s, surveillance dashboards, and human intervention to maximize production and pump performance. As a result, rod pump operations often suffer from high manual workload, limited diagnostics and dynamic well conditions. For wells fitted with pump-off controllers and variable speed drives, challenges remain around data gathering and...
Mike Brock, PLTech, LLC
One of the most misunderstood issues in sucker rod pumping is tubing back pressure. The great majority of wells that I have encountered in various fields have back pressure valves installed on the tubing side of a wellhead. However, a great many field personnel do not understand why back pressure is applied, how much to apply, and/or how it affects a well’s performance. This paper will discuss the...
Paul Bommer, A.L. Podio and Grayson Carroll University of Texas at Austin
During the down stroke the plunger in a rod pump must fall through a barrel that is filled with fluid. The plunger will establish a free fall velocity that is determined by the forces resisting downward motion. The free fall of the plunger may not be large enough to correspond to the actual velocity necessary to match the pumping speed set by the pumping unit. In this case the plunger must be pushed into the barrel by a compressive force in order to match the pumping velocity.