Artificial Lift

This paper proposes a new method to deal with sand and chemical problems in the ESP. The protection system consists of 1) ESP sand separation system that works in two stages assuring the best sand separation efficiency. The first separation stage is composed of a V-wire geometry screened designed based on production. The second stage is a centrifugal system formed by a sand cutting resistance...

The advent of low-cost IoT systems powered by AI/ML Algorithms provides new production optimization tools available at the well site to achieve the digital transformation in the onshore oil and gas business. The unique capability of well diagnostic at the edge opens new opportunities from artificial lift to production optimization. The goal is to improve overall efficiency by reducing failures...

In the Permian Basin, new unconventional wells on ESP systems experience production challenges due to high gas to liquid ratio. Unconventional wells having high initial rates with steep declines requires wells to be pumped aggressively early on. ESP’s by nature are designed to pump only liquids. Gas entering the ESP not only decreases volumetric efficiencies, but also causes high temperature...

This paper will cover the theory of operation of downhole sucker rod pumps, compression ratio calculations, some misconceptions about gas handling, simple special valves and accessories, complex specialty valves, gas breakout in the pump, dual compression and specialty pumps, some successful industry solutions, and other ideas about dealing with gas in downhole sucker rod pumps.  

Downhole separation of gas and solids for sucker rod pumping continues to be a significant challenge, particularly in horizontal wells. An advancement in downhole separation has been achieved by realizing there was an opportunity to intentionally take advantage of transient multiphase flow conditions where liquids and solids flow reversals exist. Multiple case studies in this presentation...

 Horizontal wells have a tendency to have surges of fluid and gas when producing. Especially in the case of gas, we tend to see gas production flowing in slugs, resulting in intermittent production of liquid and gas. This unpredictability of gas slugs and surges leads to free gas entering the pump more frequently and being harder to control than in a vertical well. This can lead to decreased...

More efficient operations and lower failure rates will result if sucker rod lifted wells are operated with a pump filled with liquid.  Dynamometer and fluid level surveys can be used to identify when the well is operating properly and when there are operating problems.  There are a variety of recommended practices for operating sucker rod lifted wells to provide low operating cost and low failure...

Review of Field Data To Evaluate Impact on Overall Maintenance Costs when Rod String Spacing Tool/Rod Rotator is implemented with a Wireless POC Load Cell As companies seek to optimize performance of rod pumped wells, they examine common problems which may include improper rod string spacing resulting in rod pump damage, rod failures and cable failures of pump off control (POC) wired load cells...

In the reciprocating rod lift system, the sucker rods are subjected to cyclic stresses during service which accumulate leading to fatigue failures. It is well known that the shot peen process increases the fatigue life on metal parts; with respect to sucker rods several manufacturers claim to have implemented shot peening in their manufacturing process for years. To achieve optimal parameters...

In sucker rod pumps, accurate downhole data is necessary for control and optimization of wells and assets. Downhole data is calculated from data measured at the surface.  In the 1990s, Sandia National Laboratory was contracted to conduct a series of tests using downhole dynamometer tools on vertical wells. This data validated the use of the wave equation and gave rise to most of the models and...